1.  Ensure that battery and inflator are properly connected before each use.
2.  Lithium batteries need to be recharged regularly after long-term storage,Ensure that the battery level is not less than 50%; When the battery is low, it needs to charge in time; If the AirBeast is not used for a long time, the lithium battery should be removed to prevent the battery life from being shortened.
3.  Do not operate your inflator in rainy environment to prevent device short circuit.
4.  The air inlet of the inflator is open, can not be blocked during inflation to prevent the motor from burning out, also prevent debris from entering the case.
5.  If a stall occurs during the inflation longer than 6 seconds, AirBeast will be shut off automatically to protect the motor.
6.  When the device continues to work causing the motor or battery to overheat,run the machine without load for a while,utilize the rotation of the fuselage rotor blades, drive the air circulation inside the machine, in order to cool down the machine quickly.
7.  Prevent falling and falling on hard ground to avoid damage the device.

1-2 Business Days

1. Warranty Coverage
AtMet Group Inc. guarantees that the AirBeast inflation tool is free from defects in materials and workmanship under normal use and maintenance. This warranty does not limit your contractual or statutory rights and is provided in accordance with U.S. law.

2. Warranty Period

The AirBeast inflation tool is covered by a 12-month warranty beginning from the invoice date, proof of purchase is the buyer’s responsibility. This warranty period applies under normal operating conditions, as outlined in the product’s user manual, and assumes appropriate maintenance and handling of the tool as intended by the manufacturer.

3. Serial Number Label
The serial number label on each AirBeast tool serves as proof of manufacture and sale, tracking the production and shipping date and linking to the buyer's information. Tampering, damage, or removal of this label will nullify warranty coverage.

4. Warranty Exclusions
The following conditions and items are excluded from warranty coverage:

• Normal Wear and Tear: Battery packs, chargers, or accessories subject to normal wear.
• Improper Use: Damage resulting from abnormal environmental conditions, misuse, neglect, overloading, dropping, or inadequate maintenance nullifies coverage.
• Non-Original Parts: Issues caused by non-original accessories, parts, or modifications.
• Minor Deviation: Minor deviations from product specifications that do not significantly affect functionality.
• Compatibility: Use of the AirBeast with any product other than AtMet air bags

• Warranty Claims
  To file a warranty claim, please contact support@atmetgroup.com and mail the AirBeast tool (with intact serial number label) along with the original purchase receipt to the following address:

• AtMet Service Center
• 3036 Summer Oak Pl.
• Buford, GA 30518, USA

AtMet Group will cover the cost of approved warranty repairs or replacement. The buyer is responsible for the shipping costs and risks associated with returning the tool.

6. Limitation of Warranty
This warranty is limited to repair or replacement, at Atmet Group’s discretion, of the defective product. Repairs or replacements do not extend the original warranty period. Warranty is subject to change at the discretion of the manufacturer.

7. Governing Law
This warranty is governed by the laws of the State of Georgia, USA. This warranty explicitly excludes the application of international sales laws.

Order before 14:00 PM EST (Mon-Fri) from anywhere within the continental United States, your order will ship the same day.  Over 99% of orders are ship in full the same day the ordered.